Introduction of the motor
1. Name of the motor : JGB37-3650 12V 24V DC gear motorbrushless
2. Brushless geared motor is composed of a brushless high speed motor and a gearbox to form a complete DC brushless geared motor. The life of a brushless motor is about 10 times that of a brushed motor, the maximum life can reach 10,000 hours, can greatly reduce the maintenance cost of the project. If the load of the project does not exceed the rated torque of the motor, then the motor is ideal for use in smart devices with long life requirements
3. Prominent feature : Built-in sense drive; Full metal gears; long life; stable and reliable performance; low noise; support reverse; high torque; FG signal output pulse signal; Pulse width PWM speed regulation; Overcurrent protection 2A; Overvoltage protection 30V; Over temperature protection 80 degrees Celsius; No sparks are generated when the motor is running, which avoids interference with the equipment; the brushless motor is controlled by the frequency conversion technology, which is more energy-efficient than the carbon brush motor.
4. Rated voltage have DC 12V and DC 24V
5. DC 12V ; You can choose the no load speed have :
5rpm/8rpm/15rpm/23rpm/36rpm/44rpm/71rpm/133rpm/212rpm/400rpm/634rpm
Rated torque between 1.2 To 35 KG.CM; Stall torque: between 2.4-35KG, it is recommended that your project load not exceed the rated torque; select a no load speed in DC 12V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.
6. DC 24V ; You can choose the no load speed have :
10rpm/16rpm/29rpm/47rpm/61rpm/88rpm/142rpm/266rpm/425rpm/800rpm/1270rpm
Rated torque between 2.4 To 35 KG.CM; stall torque: between 4.7-35KG, it is recommended that your project load not exceed the rated torque; select a no load speed in DC 24V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.
7. Direction of rotation of the motor: CW Or CCW ; Support Reversed
8. The shaft shape of the motor : D type, please refer to the size chart below for all dimensions of the motor.
9. The speed of the motor can be adjusted using the speed controller. This motor and speed controller are sold in combination. You can refer to the combination sales introduction below.
10. Motor DC power connection is safe; the experiment proves that the motor voltage is lower than 36V without any danger.
11. This motor is suitable for a variety of micro-automation equipment. As long as you confirm that the motor voltage and torque of your choice are suitable for the voltage and load of your project before purchase, there is no limit to the scope of use of this motor.
